Removal |
1. |
Loosen the windshield wiper arm nut (B) after removing a wiper cap (A). |
2. |
Remove the windshield wiper arm and blade. |
3. |
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm. |
4. |
Disconnect the washer hose (A) connected to cowl top cover. |
5. |
Remove the weather strip and the cowl top cover (A) after removing rivets. |
6. |
Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly. |
7. |
Remove the windshield wiper motor and linkage assembly (A) after removing 2 bolts. |
8. |
Hold the wiper motor crank arm and remove the upper linkage (A).
|
9. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
10. |
Remove the crank arm (A) after loosening a nut. |
11. |
Remove the wiper motor (A) after loosening the bolts. |
Installation |
1. |
Install the wiper motor. |
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm. |
4. |
Install the wiper motor and linkage assembly and then connect the wiper motor connector.
|
5. |
Install the cowl top cover. |
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the specified position.
A : Auto stop position (Blade) |
8. |
Set the cowl top cover on the specified spray position.
|
Inspection |
1. |
Remove the connector (A) from the wiper motor.
|
2. |
Attach the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 5. |
3. |
Check that the motor operates at low or high speed as below table.
|
Fuel Sensor Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
3.
Remove the fuel sender (A) after releasing the fix hook.
I ...
Child restraint system
Children riding in the vehicle should sit in the rear seat and must always be
properly restrained to minimize the risk of injury in an accident, sudden stop or
sudden maneuver.
According to acciden ...