Inspection |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear package tray (A) after removing the rear seat.
|
3. |
Remove the rear curtain (A) after removing the connector and bolts (6EA). |
4. |
If necessary of removing the rear curtain motor (A), remove the screws (3EA). |
Installation |
1. |
Install the rear curtain and connector. |
2. |
Install the rear package tray and rear seat. |
3. |
Connect the negative (-) battery terminal. |
If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the OFF position, check all connectors at the ignition
coils and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel ...
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect the heads of the front seat occupants and the
rear outboard seat ...
Engine Coolant Temperature Sensor (ECTS) Specifications
Specification
TemperatureResistance (k?)°C°F-40-4048.14-20-414.13 ~ 16.830325.7920682.31 ~ 2.59401041.15601400.59801760.32
...