Description |
1. |
The forward facing sensor sees if the brightness of the surroundings is low enough for the mirror to operate its function. |
2. |
The rearward looking sensor detects glaring of the reflecting light from a vehicle behind. |
3. |
The ECM is darkened to the level as determined by the
rearward looking sensor. When the glaring is no longer detected, the
mirror stops functioning.
1. LED indicator
2. ON/OFF Switch
3. Rearward looking sensor
4. Forward facing sensor |
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. The two Knock Sensor
(KS) are installed inside the V-valley of the cylinder bl ...
Vehicle certification label
The vehicle certification label attached on the driver’s (or front passenger’s)
side center pillar gives the vehicle identification number (VIN). ...
SRS care
The SRS is virtually maintenance-free and so there are no parts you can safely
service by yourself. If the SRS air bag warning light (
) does not illuminate when you turn
the ignition ON, or if it ...