Inspection |
1. |
Turn the ignition key to the "ON" position. |
2. |
Cover the front sensor to stop functioning. |
3. |
Shine a light at the rear sensor. |
4. |
The ECM should be darkened as soon as the rear sensor detects the light.
|
5. |
When the reverse gear is engaged, the ECM should not be darkened. |
6. |
When heading lights to both the front and rear sensors, the ECM should not be darkened. |
Removal |
1. |
Remove the mirror wiring cover (A) and disconect mirror connector (B). |
2. |
Remove the mounting screw (A). |
3. |
Remove the mirror (A) pulling up in the arrow direction.
|
Installation |
1. |
Install the mirror making sure the mounting bracket not to be damaged. |
2. |
Install the mirror wiring cover after reconnecting the connector and tightening the screw.
|
Front Door Outside Handle Repair procedures
Replacement
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the front door outside handle cover (A).
Tightening torque :
0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ...
Rear Seat Assembly Repair procedures
Replacement
1.
After loosening the mounting bolts, then remove the rear seat cushion assembly (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
2.
Disconnect the r ...
Output Speed Sensor Description and Operation
Description
The output speed sensor is a vital unit that measures the
rate of rotation of the transaxle's turbine shaft and output shaft, and
delivers the readings to the Transaxle Control Modu ...