Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the steering wheel.
|
3. |
Remove the cover (A) after loosening screws. |
4. |
Disconnect the upper and lower steering wheel remote control switch connector (A) in the left. |
5. |
Remove the steering wheel remote control switch assembly (A) after loosening screws. |
Installation |
1. |
Install the hands free switch to the steering wheel. |
2. |
Install the steering wheel. |
3. |
Reassemble the driver airbag module.
|
Inspection |
1. |
Check BCM input/output specification of SWRC using the GDS.
|
Refrigerant line Components and Components Location
Component Location
...
Trunk Lid Weatherstrip Repair procedures
Replacement
1.
Remove the trunk lid weatherstrip (A).
•
Do not apply sealant to the body.
2.
Installation is the reverse of removal.
•
...
Temperature Control Actuator Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12 ...