Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door trim panel.
|
3. |
Remove the connector(A) and door LED mood lamp(B).
|
4. |
Remove the rear door trim panel.
|
5. |
Remove the connector and door LED mood lamp(A).
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door trim panel.
|
3. |
Remove the rear door trim panel.
|
4. |
Replace the door lamp bulb with turning the socket counterclockwise.
[Front Door]
[Rear Door] |
Installation |
Mood Lamp |
1. |
Install the door mood lamp and connector. |
2. |
Install the door trim. |
3. |
Connect the negative (-) battery terminal. |
Door Lamp |
1. |
Install the door lamp and connector. |
2. |
Install the door trim. |
3. |
Connect the negative (-) battery terminal. |
Oil Filter Repair procedures
Replacement
1.
Remove the engine cover.
2.
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.
3.
Replace the oil filter.
(1)
Disconnect the ...
Rear Disc Brake Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the bolt & nut and then disconnect the shock absorbe ...
Repair procedures
Adjustment
Transaxle Control Module(TCM) Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM ...