Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
|
3. |
Disconnect the front fog lamp connector. |
4. |
Replace the front fog bulb (A) turning it in the counterclockwise direction. |
5. |
Remove the front fog lamp (A) after removing the screws (4EA). |
Installation |
1. |
Install the front fog bulb. |
2. |
Reconnect the lamp connector. |
3. |
Install the front wheel housing. |
Inspection |
1. |
Check BCM input/output specification of MFSW using the GDS.
(Refer to Multifunction switch - "Multifunction switch") |
Driver Airbag (DAB) Module and Clock Spring Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring
...
Electronic stability control (ESC)
The Electronic Stability Control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going.
ESC appli ...
Side curtain (if equipped)
To use the side curtain:
1. Lift the curtain by the hook (1).
2. Hang the curtain on both sides of the hook. ...