Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage room lamp (B) when prying the clip (A) with a flat-up screwdriver. |
3. |
Remove the luggage room lamp bulb in case of necessity. |
Installation |
1. |
Install the luggage room lamp assembly after connecting the lamp connector. |
Floor Console Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
If engine does not turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and ti ...
Rear Wheel Speed Sensor Components and Components Location
Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor cable
...