Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel in the driver side.
|
3. |
Disconnect the connector and remove the side switch assembly by pushing both hooks. |
Installation |
1. |
Install the connector and crash pad side switch assembly. |
2. |
Install the negative (-) battery terminal. |
Removable towing hook (front, if equipped)
1. Open the trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockw ...
Storage compartments
These compartments can be used to store small items required by the driver or
passengers.
CAUTION
To avoid possible theft, do not leave valuables in the storage compartments.
Always keep the s ...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...