Replacement |
1. |
Discharge refrigerant from refrigeration system. |
2. |
Replace faulty tube or hose.
|
3. |
Tighten joint of bolt or nut to specified torque.
|
4. |
Evacuate air in refrigeration system and charge system with refrigerant.
|
5. |
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant. |
6. |
Inspect A/C operation. |
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...
Hands Free Mic Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim Assembly")
3.
Remove the handsfree mic (A) after disconnect the connector f ...
ENGINE START/STOP button position
OFF
To turn off the engine (START/RUN position) or vehicle power (ON position), press
the ENGINE START/STOP button with the shift lever in the P (Park) position. When
you press the ENGINE START/S ...