Inspection |
1. |
Ignition "OFF". |
2. |
Disconnect evaporator temperature sensor. |
3. |
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Specification
|
Replacement |
1. |
Remove the console extension cover (A). |
2. |
Remove the crash pad lower cover (A) and then disconnect the connector (B). |
3. |
Remove the cooling hose. |
4. |
Disconnect the evaporator temp connector (A). |
5. |
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction. |
6. |
Installation is the reverse order of removal. |
Specifications
Specifications
DescriptionSpecificationsLimitGeneralTypeV-type, DOHCNumber of cylinders6Bore92mm(3.6220in.)Stroke83.8mm(3.2992in.)Total displacement3,342cc(203.94cu.in.)Compression ratio11.5 : 1F ...
Rear Seat Belt Retractor Components and Components Location
Component Location
1. Rear seat belt retractor2. Rear center seat belt retractor
...
Specifications
General Information
Specifications
ItemSpecificationTypeElectric Power Steering SystemSteering gearTypeRack & PinionRack stroke148mm (5.8268 in.)Steering angle(Max.)Inner40.52 °±2 °Outer32 ...