Hyundai Equus Manuals

Hyundai Azera: Photo Sensor Repair procedures - Air Conditioning System - Heating,Ventilation, Air Conditioning - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Photo Sensor Repair procedures

Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.

1. Auto Light Signal
2. Auto Light GND
3. Photo Signal (RH)
4. Led power (BAT)
5. LED GND (To BCM)
6. Photo Signal(LH)
7. Photo Power (SW)
8.Auto Light Power(+5v)

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With the (-) driver, remove the photo sensor (A) from the center of defrost nozzle.

3.
Install in the reverse order of removal.
Photo Sensor Description and Operation
Description 1. The photo sensor is located at the center of defrost nozzle. 2. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its lig ...

Ambient Sensor Description and Operation
Description 1. The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor resistance will increase with lower ...

See also:

Assist Handle Components and Components Location
Component Location 1. Assist handle ...

Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between ...

Intake Air Temperature Sensor (IATS) Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Barometric Pressure Sensor (BPS) and detects the intake air temperature. To calculate precise air quantity, correction of the ai ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com