Description |
1. |
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor resistance will increase with lower temperature, and decrease
with higher temperatures. |
2. |
The sensor output will be used for discharge temperature
control, temperature regulation door control, blower motor level
control, mix mode control and in-car humidity control.
|
Power Window Switch Repair procedures
Inspection
Driver Power Window Switch
1.
When checking the driver power window switch, select a vehicle type and "IPM" menu.
2.
Select "DDM (Driver Door Module)".
3.
Select option "Input/ ...
AVN Remote Controller Schematic Diagrams
Circuit Diagram
...
Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.)
2. The sensor is covered with forei ...