Hyundai Azera: Ambient Sensor Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Sensor Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Sensor Repair procedures
| Inspection |
| 1. |
Ignition "OFF" |
| 2. |
Disconnect ambient temperature sensor. |
| 3. |
Check the resistance of ambient temperature sensor between
terminals 1 and 2 whether it is changed by changing of the ambient
temperature.
Specification
|
| 4. |
If the measured resistance is not specification, substitute
with a known-good ambient temperature sensor and check for proper
operation. |
| 5. |
If the problem is corrected, replace the ambient temperature sensor. |
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the under cover (A).
|
| 3. |
Disconnect the connector and then remove the ambient temperature sensor (A).
|
| 4. |
Installation is the reverse order of removal. |
Ambient Sensor Description and Operation
Description
1.
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor resistance will increase with lower ...
Cluster ionizer Components and Components Location
Component location
...
See also:
Components and Components Location
Component Location
1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. IPM (Intelligent intergrated Platform Module)
...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com