Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the heater and blower unit.
(Refer to Heater - "Heater Unit") |
3. |
Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.
|
4. |
Installation is the reverse order of removal. |
Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
3.
Disconnect the 7P connector from the ...
Drive Plate Repair procedures
Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the adapter plate (B) and the drive plate (A).
Tighteni ...
Front Door Latch Components and Components Location
Component Location
1. Front door latch
...