Inspection |
1. |
Connect the battery voltage and check the blower motor rotation. |
2. |
If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. |
3. |
If the problem is corrected, replace the blower motor. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower cover (A) and then disconnect the connector (B). |
3. |
Disconnect the of the blower motor connector(A) and then remove the blower motor (B). |
4. |
Installation is the reverse order of removal. |
Engine Mounting Repair procedures
Removal and Installation
[Engine mounting support bracket]
1.
Install the jack to the edge of upper oil pan (A) to support the engine.
Insert the rubber block between jac ...
Specifications
Specifications
ItemSpecificationsTransmission typeA6LF2Engine modelGasoline 3.3 GDITorque converter type3-element, 1-stage, 2-phase typeTorque converter sizeO260 mm (10.2362 in.)Oil pump sy ...
Rear Stabilizer Bar Repair procedures
Replacement
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bo ...