Hyundai Equus Manuals

Hyundai Azera: Intake Actuator Repair procedures - Blower - Heating,Ventilation, Air Conditioning - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Intake Actuator Repair procedures

Inspection
1.
Ignition "OFF".
2.
Disconnect the intake actuator connector.
3.
Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grounding terminal 7.
4.
Verify that the intake actuator operates to the fresh position when connecting in the reverse.

1. -
2. -
3. Fresh
4. 5V (Vcc)
5. Feedback Signal
6. Sensor GND
7. Rec

5.
Check the voltage between terminals 5 and 6.
Specification
Door position
Voltage(5-6)
Error detecting
Recirculation
0.3 ± 0.15V
Low voltage :0.1V or less
Fresh
4.7 ± 0.15V
High voltage :4.9V or more

6.
If the intake actuator is not operated well, substitute with a known-good intake actuator and check for proper operation.
7.
If the problem is corrected, replace the intake actuator.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad.
3.
Disconnect the Intake actuator connector (A).
4.
Loosen the mounting screw and then remove the intake actuator (B).

5.
Installation is the reverse order of removal.
Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Controller
...

See also:

Seat belt precautions
WARNING All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collis ...

Outside Rear View Mirror Components and Components Location
Component Location 1. Outside rear view mirror ...

Oil Filter Body Components and Components Location
Components 1. Oil filter body2. Gasket ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com