To reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as or
position. To cancel or return the
defogging logic, do the following.
1. Turn the ignition switch to the ON position.
2. Press the defrost button ( ).
3. While holding the air conditioning button (A/C) pressed, press the air intake
control button at least 5 times within 3 seconds.
The indicator on the air intake control button blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Parking Assist Sensor Repair procedures
Removal
[Front parking assist sensor]
1.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
2.
Pull out the front sensor (A) from the sensor holder by opening the sensor holder ...
Hood Insulator Pad Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
•
Be careful not to scratch the hood panel.
2.
Installation is the ...
Dimensions
...