This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload.
Fuel Filler Door Release Actuator Repair procedures
Inspection
1.
Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts.
2.
Remove the luggage side trim [LH].
(Refer to Body - "Trunk ...
Components and Components Location
Component Location
Components
1. Heater Case (LH)2. Heater Case (RH)3. Separator4. Heater Case (Lower)5. Drain Hose6. Insulation7.Shower Duct (RH)8. Temp Actuator(PA)9. Temp Door Cam10. Evapora ...
Trunk Lid Trim Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...