1. Open the trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install the cover after use.
Oil Pump Components and Components Location
Components
1. Oil pump2. O-ring3. Oil pump sprocket4. Oil pump chain cover
...
Front Door Trim Components and Components Location
Component Location
1. Front door trim
...
Repair procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the injector connectors.
2.
With the shift lever in N or P (A/T) ...