Hyundai Azera: Fuel filter
A clogged filter can limit the speed at which the vehicle may be driven, damage the emission system and cause multiple issues such as hard starting. If an excessive amount of foreign matter accumulates in the fuel tank, the filter may require replacement more frequently.
After installing a new filter, run the engine for several minutes, and check for leaks at the connections. Fuel filters should be installed by an authorized HYUNDAI dealer.
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. ...
Fuel lines, fuel hoses and connections
Check the fuel lines, fuel hoses and connections for leakage and damage. Have
an authorized HYUNDAI dealer replace any damaged or leaking parts immediately. ...
See also:
Front Hub - Axle Components and Components Location
Components
1. Coking nut2. Brake disc3. Hub4. Dust cover5. Knuckle6. Wheel bearing7. Snap ring8. Drive shaft
...
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...
Repair procedures
Refrigerant System Service Basics
Refrigerant Recovery
Use only service equipment that is U.L-listed and is
certified to meet the requirements of SAE J2210 to remove
HFC-134a(R-134a) from the ...
Categories
Hyundai Azera Manuals
