The coolant should be changed at the intervals specified in the maintenance schedule.
Hill-start assist control (HAC)
The main intent is to prevent the vehicle from rolling backwards while driving
uphill on an inclined surface. HAC holds the braking pressure built up by the driver
when the vehicle is stopped for 2 ...
Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin ...
Power Mosfet Repair procedures
Inspection
1.
Ignition "ON"
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.
1. Drain2. Dr ...