Hyundai Azera: Engine Room Under Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Room Under Cover Repair procedures

Removal and Installation

1.

Remove the engine room under cover (A) and (B).

Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

•	When removing the under cover (B), unfasten the mounting bracket bolts and then remove the under cover and mounting bracket assembly.

2.	Installation is reverse order of removal

Engine Room Under Cover Components and Components Location

Components 1. Engine room front under cover2. Engine room RH Under cover3. Engine room LH Under cover ...

Engine Mounting Components and Components Location

Components 1. Transaxle mounting bracket2. Roll road bracket3. Sub frame4. Engine mounting bracket5. Engine mounting support bracket ...

See also:

Components and Components Location
Component Location 1. Rear curtain2. Rear curtain switch (Floor console upper cover) ...

ICM (Integrated Circuit Module) Relay Box Components and Components Location
Component Input/Output Specification No.ConnectorNo.Connector1 -11 -2 -12 -3Burglar horn13 -4 -14 -5Engine room box(Horn 15A fuse)15GND6IPM(BCM : Burglar alarm h ...

Light bulbs
WARNING - Lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is changed to the OFF position and turn off the lights to avoid sudden movement of th ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com