Hyundai Azera: Idler Components and Components Location

Drive Belt Repair procedures

Removal and Installation 1. Disconnect the battery negative terminal. 2. To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 3. Installa ...

Idler Repair procedures

Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt idler (A). Tightening torque : 52.9 ~ 57.9N.m (5.4 ~ 5.9kgf.m, 39.1 ~ ...

See also:

Camshaft Position Sensor (CMPS) Specifications
Specification ItemSpecificationOutput Voltage (V)High: 5.0VLow: 0.7VAir Gap (mm)0.5 ~ 1.5 ...

Repair procedures
Replacement [Removal]     • Put on gloves to protect your hands. • Use seat covers to avoid damaging any surfaces. 1. Remove the front pillar trim. (Refer to Inte ...

CVVT Oil Control Valve (OCV) Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...