Hyundai Azera: Drive Belt Tensioner Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures
| Removal and Installation |
| 1. |
Remove the drive belt idler.
(Refer to Timing System - "Idler") |
| 2. |
Remove the drive belt auto tensioner (A).
|
| 3. |
Installation is reverse order of removal |
Drive Belt Tensioner Components and Components Location
Components
1. Drive belt tensioner
...
Crankshaft Damper Pulley Components and Components Location
Components
1. Crankshaft damper pulley
...
See also:
Hood Lift Repair procedures
Replacement
1.
Using a screwdriver (A), lift the socket clips (B) up
slightly on both ends of the lifter (C), and then remove the lifter from
the bracket (D).
2.
Installation is the revers ...
Main Crash Pad Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
ESC Control Module Components and Components Location
Components
1. Front - left tube2. Rear - right tube3. Rear - left tube4. Front - right tube5. MC26. MC17. ESC control module (HECU)8. Damper9. Bracket
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com