Removal |
1. |
Remove the LH/RH cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover") |
2. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
3. |
Remove the drive belt auto tensioner.
(Refer to Timing System - "Drive Belt Tensioner") |
4. |
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley") |
5. |
Remove the engine mounting bracket.
(Refer to Engine And Transmission Assembly - "Engine Mounting") |
6. |
Lift up the engine assembly slightly by using a jack to get access to the side of engine. |
7. |
Remove the water pump and gasket.
(Refer to Cooling System - "Water Pump") |
8. |
Remove the timing chain cover (A).
|
Installation |
1. |
Install the timing chain cover.
|
2. |
Install the front oil seal.
(Refer to Timing System - "Front Oil Seal") |
3. |
Install the other parts reverse order of removal.
|
Repair procedures
Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left.
2.
Adjust the trunk lid height by turning the trunk lid ove ...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09977-29000Disc & hub assembly bolt removerRemoval and installation of limiter assembly.
...
CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS. (Refer to "Removal")
4.
After immersing the thermistor of the sensor into engine coolant ...