Hyundai Equus Manuals

Hyundai Azera: Water Jacket Seperator Repair procedures - Cylinder Block - Engine Mechanical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Water Jacket Seperator Repair procedures

Removal
1.
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket seperator (A).

Installation
1.
Install the #1, #2 cylinder bore water jacket seperator (A).

   
Insert the seperator align with block inner side protrusion, and it must be located under the cylinder head installing surface.

2.
Install the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head")
Water Jacket Seperator Components and Components Location
Components 1. Water jacket separator ...

Drive Plate Components and Components Location
Components 1. Drive plate2. Adapter plate ...

See also:

Power Door Mirror Actuator Repair procedures
Inspection 1. Remove the front door quadrant delta cover. (Refer to Body - "Front Door Trim") 2. Disconnect the power door mirror connector from the harness. 3. Apply battery voltage to e ...

Components and Components Location
Component Location 1. Fender ...

SS-B Solenoid Valve(ON/OFF) Schematic Diagrams
Circuit Diagram ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com