Hyundai Azera: Drive Plate Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Repair procedures
| Removal and Installation |
| 1. |
Remove the automatic transaxle.
|
| 2. |
Remove the adapter plate (B) and the drive plate (A).
|
| 3. |
Install in the reverse order of removal. |
Drive Plate Components and Components Location
Components
1. Drive plate2. Adapter plate
...
Rear Oil Seal Components and Components Location
Components
1. Rear oil seal2. Oil seal case
...
See also:
General Information
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
The support rod must be inserted into the ...
Description and Operation
Description
Tread Lamp
-
Tire Under Inflation / Leak Warning.
1.
Turn on condition
A.
When tire pressure is below allowed threshold
B.
When rapid leak is detected by the sensor.
2 ...
Removable towing hook (front, if equipped)
1. Open the trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockw ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com