Removal and Installation |
1. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
2. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
3. |
Remove the heater hoses (A).
|
4. |
Installation is reverse order of removal |
Engine Control Module (ECM) Repair procedures
Removal
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below.
[In the case of installing used ECM]
1.
Perform "ECM Neutr ...
Heater & A/C Control Unit(Full Automatic) Repair procedures
Inspection
Self diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code.
After the display panel flickers three times every 0.5
second, the corresponding fault code flicker ...
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system.
If ...