Removal and Installation |
1. |
Remove the battery and tray.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
4. |
Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).
|
5. |
Installation is reverse order of removal |
Integrated HomeLink® Wireless Control System
The HomeLink® Wireless Control System provides a convenient way to replace up
to three hand-held radiofrequency (RF) transmitters with a single built-in device.
This innovative feature will learn th ...
Center Pillar Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should
be worn low across the front of the pelvis or the pelvis, chest and shoulders, as
applicable; wearing the lap section ...