Removal and Installation |
1. |
Disconnect the over flow hose (A), and then remove the resorvior tank (B).
|
2. |
Installation is in the reverse order of removal. |
3. |
Fill the reservoir tank to the "F" line with coolant. |
Immobilizer Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector of the immobilizer unit ...
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Deployment adapter0957A-3F100Use with deployment tool.(SAB, KAB)Deployment adapter0957A ...
Oil Pan Components and Components Location
Components
1. Upper oil pan2. Lower oil pan3. Drain plug4. Drain plug gasket
...