Removal and Installation |
1. |
Remove the water pipe.
(Refer to Cooling System - "Water Pipe") |
2. |
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. |
3. |
Remove the oil filter body (A).
|
4. |
Installation is in the reverse order of removal. |
Inhibitor Switch Repair procedures
Inspection
•
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
Inspection flow
Items to chec ...
Center Fascia Panel Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
Description and Operation
Description
Communication network diagram
AbbreviationExplanationC_CANChassis Controller Area NetworkB_CANBody Controller Area NetworkMM_CANMulti media Controller Area NetworkSMKSmart Key ECUD ...