Hyundai Azera: Oil Level Gauge & Pipe Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation

1.

Remove the oil level gauge (A).

Tightening torque:

18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)

When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.

Always use a new O-ring.

2.	Installation is in the reverse order of removal.

Oil Level Gauge & Pipe Components and Components Location

Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Intake And Exhaust System

...

See also:

Front Muffler Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. 3. Disconnect the heated oxygen sensor (HO2S) connector. (Refer to Fuel Sys ...

SCAN
Press the key to scan all channels with superior reception for 5 seconds each. Once scan is complete, the previously played channel will be restored. During Scan, pressing the key again will can ...

Components and Components Location
Component Location 1. Power door mirror2. Power door mirror switch3. Power folding mirror switch ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com