Hyundai Equus Manuals

Hyundai Azera: Air Cleaner Repair procedures - Intake And Exhaust System - Engine Mechanical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Air Cleaner Repair procedures

Removal and Installation
1.
Remove the battery.
2.
Remove the engine cover.
3.
Remove the air duct (A).

4.
Remove the air cleaner assembly.
(1)
Disconnect barometric pressure sensor (BPS) connector (A)
(2)
Disconnect the breather hose (B)
(3)
Disconnect the intensifier hose (C)
(4)
Loosen the clamp (D) and then disconnect the air intake hose from the throttle body.

Tightening torque :
2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)

(5)
Remove the air cleaner assembly (E).

Tightening torque :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

5.
Install in the reverse order of removal.
Air Cleaner Components and Components Location
Components 1. Air duct2. Air cleaner lower cover3. Air cleaner element4. Air cleaner upper cover5. Breather hose6. Air in take hose7. Resonator8. Clamp9. Barometric pressure sensor ...

Surge Tank Components and Components Location
Components 1. Surge tank2. Surge tank stay ...

See also:

Coolant Repair procedures
Replacement And Air Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radi ...

Steering Column and Shaft Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3 ...

Rear Wheel Speed Sensor Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com