Removal and Installation |
[LH] |
1. |
Disconnect the LH front and rear heated oxygen sensor (HO2S) connector.
|
2. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Front Muffler") |
3. |
Remove the cooling fan assembly.
(Refer to Cooling System - "Cooling Fan") |
4. |
Remove oil level gauge assembly.
(Refer to Lubrication System - "Oil Level Gauge & Pipe") |
5. |
Remove the LH exhaust manifold heat protector (A).
|
6. |
Remove the LH exhaust manifolds stay (A),and then remove the LH exhaust manifold (B) and gasket.
|
7. |
Install in the reverse order of removal.
|
[RH] |
1. |
Disconnect the RH front and rear heated oxygen sensor (HO2S) connector.
|
2. |
Remove the surge tank.
(Refer to Intake And Exhaust System - "Surge Tank") |
3. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Front Muffler") |
4. |
Remove the RH exhaust manifold heat protector (A).
|
5. |
Remove the RH exhaust manifolds stay (A),and then remove the RH exhaust manifold (B) and gasket.
|
6. |
Install in the reverse order of removal.
|
Canister Close Valve (CCV) Specifications
Specification
ItemSpecificationCoil Resistance (?)19.8 ~ 21.8 (20°C)
...
Windshield wiper/washer
A :Wiper speed control
MIST – Single wipe
OFF – Off
INT – Intermittent wipe
LO – Normal wiper speed
HI – Fast wiper speed
B : Intermittent wipe time adjustment
C :Wash with brief wipes ...
Rear Wheel Speed Sensor Components and Components Location
Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor cable
...