Hyundai Azera: Front Muffler Components and Components Location

Exhaust Manifold Repair procedures

Removal and Installation [LH] 1. Disconnect the LH front and rear heated oxygen sensor (HO2S) connector. (Refer to Fuel System - "Heated Oxygen Sensor (HO2S)") 2. Remove the front muffler ...

Front Muffler Repair procedures

Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. 3. Disconnect the heated oxygen sensor (HO2S) connector. (Refer to Fuel Sys ...

See also:

Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connec ...

TPMS Receiver Description and Operation
Description 1. Mode (1) Virgin State A. The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state. B. In this state, there is no Auto-L ...

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...