Removal and Installation |
1. |
Disconnect the battery negative terminal. |
2. |
Remove the engine room under cover. |
3. |
Disconnect the heated oxygen sensor (HO2S) connector.
|
4. |
Remove the front muffler (A).
|
5. |
Install in the reverse order of removal. |
Steering wheel remote controller
(1) VOLUME Used to control volume.
(2) SEEK When pressed shortly (under 0.8 seconds).
- FM, AM, XM mode : searches broadcast frequencies saved to presets.
- CD, USB, iPod®, My Music, BT Audio mod ...
Door Lamp Repair procedures
Removal
Mood lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to Body - "Front Door Trim")
3.
Remove the connector(A) and door LED mood l ...
Front Stabilizer Bar Repair procedures
Replacement
1.
Remove the front wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub b ...