Hyundai Equus Manuals

Hyundai Azera: Description and Operation - Ignition System - Engine Electrical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Description and Operation

Description
Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are preprogrammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM. The ignition coil is activated, and timing is controlled.
Ignition System
...

Repair procedures
On-vehicle Inspection Spark Test 1. Remove the ignition coils. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug socket, remove the spark plug. 3. Install the spark p ...

See also:

Hill-start assist control (HAC)
The main intent is to prevent the vehicle from rolling backwards while driving uphill on an inclined surface. HAC holds the braking pressure built up by the driver when the vehicle is stopped for 2 ...

Master Cylinder Components and Components Location
Components 1. Reservoir cap2. Reservoir3. Grommet4. Master cylinder ...

Timing Chain Cover Components and Components Location
Components 1. Timing chain cover2. Gasket ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com