On-vehicle Inspection |
Spark Test |
1. |
Remove the ignition coils.
(Refer to Ignition System - "Ignition Coil") |
2. |
Using a spark plug socket, remove the spark plug. |
3. |
Install the spark plug to the ignition coil. |
4. |
Ground the spark plug to the engine. |
5. |
Check if spark occurs while engine is being cranked.
|
6. |
Inspect all the spark plugs. |
7. |
Using a spark plug socket, install the spark plug. |
8. |
Install the ignition coil. |
9. |
Reconnect the ignition coil connector. |
Cooling system
Check cooling system components, such as radiator, coolant reservoir, hoses and
connections for leakage and damage. Replace any damaged parts. ...
Using Bluetooth® Wireless Technology Audio Mode
Playing/Pausing Bluetooth® Wireless Technology Audio
Once a Bluetooth® Wireless Technology device is connected, the mode will automatically
start.
While playing, press the key to
pause and pres ...
Trunk Lid Latch Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...