Hyundai Azera: Ignition Coil Components and Components Location

Repair procedures

On-vehicle Inspection Spark Test 1. Remove the ignition coils. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug socket, remove the spark plug. 3. Install the spark p ...

Ignition Coil Repair procedures

Removal and Installation [LH] 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the LH ignition coil connectors (A) and then remove the LH ignition ...

See also:

Repair procedures
Inspection (With GDS) 1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Transaxle Oil Temperature Sensor Specifications
Specifications ? Type: Negative Thermal Coefficient(NTC) Type Temp.[(°C)°F]Resistance (k?)(-40)-4048.1(-20)-4.015.6(0)32.05.88(20)68.02.51(40)104.01.11(60)140.00.61(80)176.00.32(100)212.00.18(12 ...