System Block Diagram |
Component part | Function |
Vehicle-speed sensor | Converts vehicle speed to pulse. |
ECM | Receives signals from sensor and control switches. |
Cruise control indicator | Illuminate when CRUISE main switch is ON (Built into cluster) |
Cruise Control switches | ON/OFF switch | Switch for automatic speed control power supply. |
Resume/Accel switch | Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch) |
Set/Coast switch | |
Cancel switches | Cancel switch | Sends cancel signals to ECM. |
Brake-pedal switch | |
Transaxle range switch (A/T) | |
ETS motor | Regulates the throttle valve to the set opening by ECM. |
Microphone Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim Assembly")
3.
Remove the handsfree mic (A) after disconnect the connector f ...
Side Impact Sensor (SIS) Description and Operation
Description
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensor (P-SIS) which are installed at each center of the front
door module (LH and RH) and two SIS which are ins ...
Power Window Motor Schematic Diagrams
Circuit Diagram
Front Safety Window
Rear Window
...