Removal and Installation |
1. |
Disconnect the battery negative terminal.
|
2. |
Remove the steering wheel.
|
3. |
Loosen the screws and then remove the cover (A). |
4. |
Disconnect the steering wheel remote control switch connectors (A). |
5. |
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautions of fixed clip. |
6. |
Remove the smart cruise control switch (A). |
7. |
Installation is the reverse of removal. |
Fuel Filler Cap Description and Operation
Description
A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which would seal the fuel
filler. After the gasket on the fuel filler cap ...
Fuel Pump Repair procedures
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
3.
Check motor operation by fuel pump connector (A) connecti ...
Cowl Cross Bar Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...