Circuit Diagram |
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Door Scuff Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
On-board Refueling Vapor Recovery (ORVR) valve Description and Operation
Operation
Normal status Full fuelVehicle Rollover / steepValve openValve closeValve close
...