Inspection |
1. |
After disconnecting the vapor hose from the PCV valve, remove the PCV valve. |
2. |
Reconnect the PCV valve to the vapor hose. |
3. |
Inspect the PCV vlave operation.
|
4. |
If the vacuum is not felt, clean or replace the vapor hose. |
Assist Handle Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Put on gloves to protect your hands.
1.
Re ...
Oil Filter Body Repair procedures
Removal and Installation
1.
Remove the water pipe.
(Refer to Cooling System - "Water Pipe")
2.
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.
...
Engine Room Under Cover Components and Components Location
Components
1. Engine room front under cover2. Engine room RH Under cover3. Engine room LH Under cover
...