Removal |
1. |
Turn the ignition switch OFF, and then remove battery (-) cable. |
2. |
Remove the fuel tank.
|
3. |
Disconnect the vapor hose (A). |
4. |
Remove installation bolts (B), and then remove the ORVR valve (C) from the fuel tank, |
Inspection |
1. |
Visually check if the valve and gasket seal are deformed or damaged. |
2. |
Check if the air is passed smoothly when blowing into the nipple of ORVR valve as below position. |
3. |
Check if there is resistance when blowing into the nipple of ORVR valve as below position. |
Installation |
1. |
Installation is reverse of removal. |
Curtain Airbag (CAB) Module Components and Components Location
Components
...
Shift Lever Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...
Panoramaroof Assembly Repair procedures
Removal
1.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
2.
Remove the rear window glass.
(Refer to "Rear Window Glass")
3.
Remove the movable glass.
(Refer to Panor ...