Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Lift the vehicle. |
3. |
Disconnect the canister close valve connector (A). |
4. |
Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve. |
5. |
Remove the fuel tank air filter assembly after removing bolts (C). |
6. |
Release the lever (A), and then separate the canister close
valve (B) from the fuel tank air filter (C) after rotating it in the
direction of the arrow in the figure. |
Installation |
• |
Install the component with the specified torques. |
• |
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting. |
1. |
Installation is reverse of removal. |
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are required ...
Opening the trunk
Press the trunk unlock button for more than 1 second on the smart key.
Press the switch on the trunk handle with the smart key in your possession
(2).
Insert the mechanical key of the smar ...
Automatic heating and air conditioning
1. Push the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically
by setting the temperature.
2. Set the temperature to the desired temperatur ...