Hyundai Equus Manuals

Hyundai Azera: Injector Drive Box (IDB) Repair procedures - Engine Control System - Engine Control/Fuel System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Injector Drive Box (IDB) Repair procedures

Removal
1.
Turn the ignition switch off and disconnect the battery negative (-) cable.
2.
Disconnect the injector drive box (IDB) connector (A).

3.
Remove the air cleaner assembly.
4.
Remove the main wiring harness (B) after removing the nut (A).

5.
Remove the IDB bracket assembly (B) after removing the bolts (A).

6.
After removing the installation bolts (A), remove the IDB from the bracket.

Installation
1.
Installation is the reverse of removal.

IDB installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
IDB bracket installation bolt (on vehicle):
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)

Injector Drive Box (IDB) Schematic Diagrams
IDB terminal and Inoutput IDB terminal function Connector [CLG02] Pin No.DescriptionConnected to1-?2-?3-?4-?5-?6-?7-?8-?9-?10-?11-?12-?13-?14-?15-?16Injector (Cylinder #3) [Low] control outputI ...

ETC (Electronic Throttle Control) System Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cab ...

See also:

Power Window Switch Repair procedures
Inspection Driver Power Window Switch 1. When checking the driver power window switch, select a vehicle type and "IPM" menu. 2. Select "DDM (Driver Door Module)". 3. Select option "Input/ ...

Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Air Cleaner Components and Components Location
Components 1. Air duct2. Air cleaner lower cover3. Air cleaner element4. Air cleaner upper cover5. Breather hose6. Air in take hose7. Resonator8. Clamp9. Barometric pressure sensor ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com