Hyundai Azera: Barometric Pressure Sensor (BPS) Specifications
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Specifications
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Specifications
| Specification |
| Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
| 10.0 (0.01, 0.15) | 0.50 |
| 55.0 (0.56, 7.98) | 2.21 |
| 100.0 (1.01, 14.5) | 3.93 |
| 115.0 (1.17, 16.9) | 4.50 |
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...
Barometric Pressure Sensor (BPS) Schematic Diagrams
Circuit Diagram
...
See also:
Trunk Lid Assembly Components and Components Location
Component Location
1. Trunk lid assembly
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Trunk Lid Key Holder Components and Components Location
Component Location
1. Trunk lid key holder
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com