Hyundai Azera: Barometric Pressure Sensor (BPS) Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Repair procedures
| Inspection |
| 1. |
Connect the GDS on the Data Link Connector (DLC). |
| 2. |
Measure the output voltage of the BPS at idle and IG ON.
|
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
Disconnect the barometric pressure sensor connector (A). |
| 3. |
Remove the installation bolt (B), and then remove the sensor from the air cleaner assembly.
|
| Installation |
|
|
| 1. |
Installation is reverse of removal.
|
Barometric Pressure Sensor (BPS) Schematic Diagrams
Circuit Diagram
...
Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Barometric Pressure Sensor (BPS) and detects the intake air temperature.
To calculate precise air quantity, correction of the ai ...
See also:
Torque Converter Control Solenoid Valve (T/CON_VFS) Schematic Diagrams
Circuit Diagram
...
Parking Brake Pedal Assembly Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the junction b ...
Opening the hood
Open the hood after turning off the engine on a flat surface, move the shift
lever to the P(Park) position and set the parking brake.
1. Pull the release lever to unlatch the hood. The hood shou ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com