Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the IATS connector. |
3. |
Measure resistance between the IATS terminals 3 and 4. |
4. |
Check that the resistance is within the specification.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the intake air temperature sensor connector (A). |
3. |
Remove the installation bolts (B), and then vertically remove the sensor from the air cleaner assembly. |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Filler-Neck Assembly Repair procedures
Removal
1.
Lift the vehicle.
2.
Disconnect the fuel filler hose (A).
3.
Disconnect the ventilation hose (B) from the fuel tank air filter.
4.
Open the fuel filler door and then remove ...
Front Seat Shield Outer Cover Components and Components Location
Component Location
1. Front seat shield outer cover
...
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper.
(Refer to Body - "Front Bumper Cover")
2.
Loosen the bolts and nuts and then remove the smart cruise control unit assembly (A) from the vehicle.
3.
Disconn ...